Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.1-RELEASE #0: Tue Dec  2 22:55:39 CET 2003
    root@workstation.andromeda:/usr/src/sys/i386/compile/KERNEL-Work
Preloaded elf kernel "/boot/kernel/kernel" at 0xc05dc000.
Preloaded elf module "/boot/kernel/splash_bmp.ko" at 0xc05dc26c.
Preloaded splash_image_data "/boot/splash.bmp" at 0xc05dc31c.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc05dc36c.
Timecounter "i8254"  frequency 1193182 Hz
Timecounter "TSC"  frequency 2423873992 Hz
CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz (2423.87-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf24  Stepping = 4
  Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
real memory  = 268353536 (255 MB)
avail memory = 254496768 (242 MB)
netsmb_dev: loaded
Pentium Pro MTRR support enabled
VESA: v3.0, 32768k memory, flags:0x1, mode table:0xc00c52cd (c00052cd)
VESA: Matrox Graphics Inc.
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <ASUS   P4B533  > on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 10 entries at 0xc00f2420
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-fast"  frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
acpi_cpu0: <CPU> port 0x530-0x537 on acpi0
acpi_cpu1: <CPU> port 0x530-0x537 on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82845 host to AGP bridge> mem 0xf8000000-0xfbffffff at device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xd800-0xd81f irq 11 at device 29.0 on pci0
usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xd400-0xd41f irq 12 at device 29.1 on pci0
usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xd000-0xd01f irq 10 at device 29.2 on pci0
usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcm0: <Creative EMU10K1> port 0xb800-0xb81f irq 15 at device 12.0 on pci2
pcm0: <TriTech TR28602 AC97 Codec>
sym0: <875> port 0xb000-0xb0ff mem 0xf3000000-0xf3000fff,0xf3800000-0xf38000ff irq 3 at device 13.0 on pci2
sym0: Symbios NVRAM, ID 7, Fast-20, SE, parity checking
sym0: open drain IRQ line driver, using on-chip SRAM
sym0: using LOAD/STORE-based firmware.
sym0: SCAN AT BOOT disabled for targets 0 1 2 3 4 5 9 10 11 12 13 14 15.
sym0: SCAN FOR LUNS disabled for targets 0 1 2 3 4 5 6 8 9 10 11 12 13 14 15.
xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xa800-0xa87f mem 0xf2800000-0xf280007f irq 10 at device 14.0 on pci2
xl0: Ethernet address: 00:50:da:19:79:d1
miibus0: <MII bus> on xl0
bmtphy0: <3c905B 10/100 internal PHY> on miibus0
bmtphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH4 UDMA100 controller> port 0xf000-0xf00f,0-0x3,0-0x7,0-0x3,0-0x7 irq 10 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
orm0: <Option ROMs> at iomem 0xcc000-0xcffff,0xc0000-0xc8fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <8 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
ipfw2 initialized, divert disabled, rule-based forwarding enabled, default to deny, logging limited to 50 packets/entry by default
IPsec: Initialized Security Association Processing.
Waiting 5 seconds for SCSI devices to settle
(noperiph:sym0:0:-1:-1): SCSI BUS reset delivered.
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
cd0 at sym0 bus 0 target 6 lun 0
cd0: <TEAC CD-ROM CD-532S 3.0A> Removable CD-ROM SCSI-2 device 
cd0: 20.000MB/s transfers (20.000MHz, offset 16)
cd0: Attempt to query device size failed: NOT READY, Medium not present
da0 at sym0 bus 0 target 8 lun 0
da0: <SEAGATE ST34501W 8301> Fixed Direct Access SCSI-2 device 
da0: 40.000MB/s transfers (20.000MHz, offset 15, 16bit), Tagged Queueing Enabled
da0: 4339MB (8887200 512 byte sectors: 255H 63S/T 553C)
Mounting root from ufs:/dev/da0s1a